NTB313 Three Jaw Pneumatic Parallel Jaw gripper with through hole Kitagawa
kitagawa
Kitagawa India

NTB313 Three Jaw Pneumatic Parallel Jaw gripper with through hole

Product code: NTB313

High quality, durable standard model with a large thru-hole

Large Through-hole suitable for attaching fixtures
Lightweight & compact
Swarf protection and improved maintenance
High gripping force for stable gripping of heavy workpieces
Lightweight and compact body not limiting the load capacity of robot
New mounting style for smaller protrusion compared with conventional models
Improved gripping accuracy due to extremely rigid body

Close Force(N): 3580
Open Force(N): 3750
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 20
Through Hole(mm): 29.9
Jaw Stroke: 20mm(dia.), 10mm(per finger)

Email a local distributor

Close Force(N): 3580
Open Force(N): 3750
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 20
Through Hole(mm): 29.9
Jaw Stroke: 20mm(dia.), 10mm(per finger)
Repeatability(mm): ±0.015
Mass (kg): 2.10
Air Consumption per reciprocating (cm3): 190.1
Air pressure (MPa): 0.2 ~ 0.8
Operating Temperature (? ): 5 ~ 60

Note 1: Please install a check valve in the air-pressure circuit so that the gripper will not release a workpiece even if the air pressure drops down.
Note 2: When the jaw stroke is detected by the reed switches, mount reed switched on the grooves on the outer periphery of the product. Up to 4 reed switches can be mounted.
Note 3: In case proximity switches are used for direct detection of jaw stroke, please purchase proximity switch brackets additionally.
Note 4: The material of internal seals of grippers is nitrile rubber. If the fluororubber seals are needed, please consult Kitagawa distributor.

View more: Robot Grippers | Grippers with through hole