FSB-0 with drive pins and movable centre pin

Product code: FSB-0

Neidlein Face Drivers – For Turning & Hard Turning

Power-operated by the thrust of the tailstock

Maximum torque transmission and supreme accuracy

Extended tool-life of driving devices and cutting tools due to vibration-free running

Compensating Driving devices for Ideal clamping of the workpiece.

Constant datum-point at the end face of the workpieces

Centre Range (mm): 0 – 3

Clamping diameter Range (mm): 6 – 19

Number of Drive Pins: 3

Drive Pin Diameter (mm): 8

Centre Body Diameter (mm): Ø22

Email a local distributor

Downloads:

Catalogue Pages

Key Features

The entire surface of the workpiece can be tooled and finished by clamping with a maximum of torque transmission. NEIDLEIN face drivers are mechanical clamping systems which are suited for turning as well as hard turning.

Face drivers of type FSB are power-operated by the thrust of the tailstock. Workpieces are clamped centrically using a mov-able center pin. This way different centerings can be adjusted, thus ensuring a constant datum-point at the end face of the workpieces.

The drive pins are ”floatingly“, thus compensating for variations in workpiece, squareness and surface finish

A maximum of torque transmission, thus achieving high metal removing rates

Extended tool-life of driving devices and cutting tools due to vibration-free running

Run-out deviation max.: 0.015 - 0.02 mm

Fixed center pin/fixed datum-point in clamped state

Simple handling

Further information

Please click here for information on metal removing rates to be obtained as well as for the tailstock forces required.

For compatible standard drive pins and center pins please click here.

FSB01/FSB0 are supplied with a centre pin but without drive pins and all other FSB models are supplied without centre pin and without drive pins. Please specify which centre pin and drive pins are required when ordering.

We will be glad to design clamping devices suitable for your workpieces.

Body Diameter (d) (mm): 48

Center body diameter (d1) (mm): 22

Centering diameters (mm): 0 - 3

Drive pin diameter (d2) (mm): 8

Flange Diameter (d3)(mm): 160

Spring casing outer diameter (d5)(mm): 25

Mounting bolt P.C.D. (mm): 133.4

Body length from rear of flange (l1) (mm):115

Length from rear of flange to register diameter (mm): 6

Diameter of register diameter (mm): 100 h6

Length from register diameter to rear of Spring casing (l2) (mm): 28