QG20810 Two Jaw pneumatic gripper face plate Kitagawa
kitagawa
Kitagawa

QG20810 Two Jaw pneumatic gripper face plate

Code du produit: QG20810

Quick plate exchange gripper two jaw faceplate

Quick jig exchange with easy operation, just loosen the lock nut
Lightweight and compact
Easy retrofit since it is manual exchange
No need for teaching or adjustment at jig exchange

Close Force(N): 1010
Open Force(N): 1120
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 20
Jaw Stroke: 15.6mm(dia.), 7.8mm(per finger)

Envoyer un email à un distributeur local

Close Force(N): 1010
Open Force(N): 1120
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 20
Jaw Stroke: 15.6mm(dia.), 7.8mm(per finger)
Repeatability(mm): ±0.03
Mass (kg): 0.40
Air pressure (MPa): 0.2 ~ 0.6
Operating Temperature (? ): 5 ~ 60

Note 1: Please install a check valve in the air-pressure circuit so that the gripper will not release a workpiece even if the air pressure drops down.
Note 2:When the jaw stroke is detected by the reed switches, mount reed switched on the grooves on the outer periphery of the base unit. Up to 6 reed switches can be mounted. This model does not support stroke check with Proximity switches.
Note 3: The material of internal seals of grippers is nitrile rubber. If the fluororubber seals are needed, please consult Kitagawa distributor.

Voir plus: Grippers | Easy Changeover Grippers | 2-Jaw Face Plate