NTS307 Three Jaw Pneumatic Parallel gripper | Kitagawa
kitagawa
Kitagawa

NTS307 Three Jaw Pneumatic Parallel gripper

Código de producto: NTS307

High quality & durable standard model

Swarf protection and improved maintenance
High gripping force for stable gripping of heavy workpieces
Lightweight and compact body not limiting the load capacity of robot
New mounting style for smaller protrusion compared with conventional models
Improved gripping accuracy due to extremely rigid body

Close Force(N): 750
Open Force(N): 800
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 10
Jaw Stroke: 12mm(dia.), 6mm(per finger)

Correo a distribuidor local

Close Force(N): 750
Open Force(N): 800
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 10
Jaw Stroke: 12mm(dia.), 6mm(per finger)
Repeatability(mm): ±0.01
Mass (kg): 0.40
Air Consumption per reciprocating (cm3): 24.1
Air pressure (MPa): 0.2 ~ 0.8
Operating Temperature (

Note 1. Please install a check valve in the air-pressure circuit so that the gripper will not release a workpiece even if the air pressure drops down.
Note 2. A reed switch bracket is attached.
Note 3. In case proximity switches are used for direct detection of jaw stroke, please purchase proximity switch brackets additionally.
Note 4. The material of internal seals of grippers is nitrile rubber. If the fluororubber seals are needed, please consult Kitagawa distributor.

Ver más: Grippers | 2 & 3 jaw grippers for robot arms | NTS Series - Three Jaw