KEM-DS Standard Sleeves | Kitagawa
kitagawa
Kitagawa

KEM-DS Standard Sleeves

Product code: KEM-DS-STANDARDSLEEVES

KEM Series Standard Expanding Sleeves
To suit:
KEM-DS-xx Mandrels 

  • Standard sleeves
  • Range from 28.30mm - 41.90mm

 

Email a local distributor

Standard Sleeves for use with KEM-DS-xx Mandrels

  • 1/2 length sleeves & extended length sleeves available

Specifications:

Nominal Sleeve Diameter (mm) Gripping Range (mm) Part Number
28.40 28.30 - 29.10 92.150.210.2840
29.20 29.10 - 29.90 92.150.210.2920
30.00 29.90 - 30.70 92.150.210.3000
30.80 30.70 - 31.50 92.150.210.3080
31.60 31.50 - 32.30 92.150.210.3160
32.40 32.30 - 33.10 92.150.210.3240
33.20 33.10 - 33.90 92.150.210.3320
34.00 33.90 - 34.70 92.150.210.3400
34.80 34.70 - 35.50 92.150.210.3480
35.60 35.50 - 36.30 92.150.210.3560
36.40 36.30 - 37.10 92.150.210.3640
37.20 37.10 - 37.90 92.150.210.3720
38.00 37.90 - 38.70 92.150.210.3800
38.80 38.70 - 39.50 92.150.210.3880
39.60 39.50 - 40.30 92.150.210.3960
40.40 40.30 - 41.10 92.150.210.4040
41.20 41.10 - 41.90 92.150.210.4120
  • • All expanding sleeves are bonded to ensure they are fully sealed against coolant and chip penetration.
  • • A double - angle design of KEM Expanding Mandrels provides parallel expansion of the sleeve for full-length workpiece contact and ensures positive release when the part is unclamped.
  • • All expanding sleeves collapse 0.1mm below nominal ground sleeve diameter size to ensure easy workpiece loading and unloading.

 

View more: Collet Chucks | Expanding Mandrels | Standard Sleeves