KEM-DS Flush Sleeves | Kitagawa
kitagawa
Kitagawa

KEM-DS Flush Sleeves

Product code: KEM-DS-FLUSHSLEEVES

KEM Series Flush Expanding Sleeves
To suit:
KEM-DS-xx Mandrels

  • Flush Sleeves
  • Range from 39.5mm - 51.5mm

With flush sleeves the expanding pin is level with the front, allowing full ID depth clamping.

 

Email a local distributor

Flush Sleeves for use with KEM-DS-xx Mandrels

  • 1/2 length sleeves & extended length sleeves available

Specifications:

Nominal Sleeve Diameter (mm) Gripping Range (mm) Part Number
39.60 39.50 - 40.30 92.151.210.3960
40.40 40.30 - 41.10 92.151.210.4040
41.20 41.10 - 41.90 92.151.210.4120
42.00 41.90 - 42.70 92.151.210.4200
42.80 42.70 - 43.50 92.151.210.4280
43.60 43.50 - 44.30 92.151.210.4360
44.40 44.30 - 45.10 92.151.210.4440
45.20 45.10 - 45.90 92.151.210.4520
46.00 45.90 - 46.70 92.151.210.4600
46.80 46.70 - 47.50 92.151.210.4680
47.60 47.50 - 48.30 92.151.210.4760
48.40 48.30 - 49.10 92.151.210.4840
49.20 49.10 - 49.90 92.151.210.4920
50.00 49.90 - 50.70 92.151.210.5000
50.80 50.70 - 51.50 92.151.210.5080
  • • All expanding sleeves are bonded to ensure they are fully sealed against coolant and chip penetration.
  • • A double - angle design of KEM Expanding Mandrels provides parallel expansion of the sleeve for full-length workpiece contact and ensures positive release when the part is unclamped.
  • • All expanding sleeves collapse 0.1mm below nominal ground sleeve diameter size to ensure easy workpiece loading and unloading.

 

View more: Collet Chucks | Expanding Mandrels | Flush Sleeves