NTS313 Three Jaw Pneumatic Parallel gripper | Kitagawa
kitagawa
Kitagawa

NTS313 Three Jaw Pneumatic Parallel gripper

Označení výrobku: NTS313

High quality & durable standard model

Swarf protection and improved maintenance
High gripping force for stable gripping of heavy workpieces
Lightweight and compact body not limiting the load capacity of robot
New mounting style for smaller protrusion compared with conventional models
Improved gripping accuracy due to extremely rigid body

Close Force(N): 3180
Open Force(N): 3400
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 20
Jaw Stroke: 24mm(dia.), 12mm(per finger)

Zaslat e-mail obchodnímu zástupci

Close Force(N): 3180
Open Force(N): 3400
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 20
Jaw Stroke: 24mm(dia.), 12mm(per finger)
Repeatability(mm): ±0.01
Mass (kg): 2.25
Air Consumption per reciprocating (cm3): 201
Air pressure (MPa): 0.2 ~ 0.8
Operating Temperature (

Note 1. Please install a check valve in the air-pressure circuit so that the gripper will not release a workpiece even if the air pressure drops down.
Note 2. A reed switch bracket is attached.
Note 3. In case proximity switches are used for direct detection of jaw stroke, please purchase proximity switch brackets additionally.
Note 4. The material of internal seals of grippers is nitrile rubber. If the fluororubber seals are needed, please consult Kitagawa distributor.

Více: Grippers | 2 & 3 jaw grippers for robot arms