QGB06 Pneumatic gripper base unit | Kitagawa
kitagawa
Kitagawa Middle East

QGB06 Pneumatic gripper base unit

Product Code: QGB06

Quick plate exchange gripper base unit

Quick jig exchange with easy operation, just loosen the lock nut
Lightweight and compact
Easy retrofit since it is manual exchange
No need for teaching or adjustment at jig exchange

Pull Force (N): 867
Push Force(N): 968
Piston Stroke(mm): 7.5

Email a local distributor

Pull Force (N): 867
Push Force(N): 968
Piston Stroke(mm): 7.5
Mass (kg): 0.75
Air Consumption per reciprocating (cm3): 24.1
Air pressure (MPa): 0.2 ~ 0.8
Operating Temperature (

Note 1: Please install a check valve in the air-pressure circuit so that the gripper will not release a workpiece even if the air pressure drops down.
Note 2:When the jaw stroke is detected by the reed switches, mount reed switched on the grooves on the outer periphery of the base unit. Up to 6 reed switches can be mounted. This model does not support stroke check with Proximity switches.
Note 3: The material of internal seals of grippers is nitrile rubber. If the fluororubber seals are needed, please consult Kitagawa distributor.

View more: Robot Grippers | Easy Changeover Grippers | Gripper Base Unit